Borum waste oil evacuators take oil draining convenience and efficiency to the next level, by sucking hot oil from engines and transmissions via the dipstick tube or the traditional (under hoist) large oil drain pan. This vacuum-charged unit is completely portable and easy to use. Included are 3 different suction probes equipped with quick-disconnect couplers for fluid extraction. The transparent recovery chamber reservoir acts as a vacuum receiver operated by simple venturi and flow control valves. The transparent chamber feature is also very handy to check the quantity and quality of extracted oil during or immediately after the service. Suction volume is 1.5-2 Litres per minute using 6mm probe at oil temp 70-80° C.
The self evacuating feature makes emptying clean and easy with an easy to see clear oil level sight gauge. Once pressurised the oil drainer discharge system becomes completely portable. This allows the unit to be vacuum charged and emptied at will, and used independently of the air supply.
The Borum Industrial Air operated waste oil drainer/extractor with graduated 9 litre transparent recovery chamber, can now extract used oil and other fluids from any vehicle using this venturi-vacuum extracting system directly from dipstick. Not having to lift vehicles or remove plugs increases efficieny. Great for cars, 4WD, motorcycles, small engines, marine applications and other industrial plant.
Note: The oil change temperature should be between 60-80 degrees celsius (when the engine is just switched off) for the extraction system to operate efficiently. This equipment is not designed to suck brake oils, fuels, inflammable and corrosive liquids.
Steel fabricated 65L discharge tank
Height adjustable steel drain pan, fitted with grid filter
Gravity feed reservoir with air discharge hose.
Includes quick release oil dipstick probes
Fitted with reservoir oil level indicator tube
Heavy-duty wheels and castors for easy mobility
Spare parts available in Australia
Discharge tank capacity: 65 Litres
Transparent recovery chamber capacity: 9 Litres
Vacuum Working Pressure: 0.4 - 0.6MPa
Degree of Vacuum: 0.5 - 0.07Mpa
Suction Rate: 1.5-2 Litres per min using 6mm probe at oil temp 80°C
Max Discharge pressure: 12psi
Discharge Hose Length: 1940mm
Discharge Rate: 3 - 3.5 Litres per min
Dimensions: 500 x 500 x 1800mm