BORDO INDUSTRIAL

Bordo 3 Pce Scratch Brush Set. Buy 1 Get 1 Free!

(No reviews yet) Write a Review

$29.95 $26.95

(You save $3.00)

SKU:: 5171-S1
Shipping:: $5.50

Current Stock:

Quantity:

Description

These are value guys especially with this 2 for 1 offer! Stock up! (so by one 5171-S1 and we will send you 2 sets)

Features

0.50mm Nylon Filament Brush for cleaning of delicate parts with no surface scratching.
0.15mm Stainless Steel Wire Brush for use on stainless steel and non-ferrous metals to avoid rust contamination.

0.15mm Brass Wire Brush is non-sparking and will not scratch harder metals. Ideal for use on brass and copper work pieces.

Related Products

Features:
• PP handle
• 3 row bristles
• Ergonomic grip with comfort grip and upper handle
• Brass Plated: Stripping, Paint removal, Rust & scale removal — Quick view

Medalist Brass Plated Wire Brush Buy 1 Get 1 Free!

$22.50 $14.50

Add to Cart

Harden Plated Steel Wire Brush Buy 1 Get 1 Free!

$16.50 $13.50

Add to Cart

170 Wire cutters flush cutter pliers are a type of cutting tool used to trim wire or leads with precision and minimal damage.
They have a sharp, flat cutting surface that allows the user to cleanly cut close to the surface of a circuit board without leaving any protruding ends.
They are commonly used in electronics work and jewellery making. — Quick view

Transquip Wire Cutters & Super Nips. Buy 1 Get 1 Free!

$29.50 $14.50

Add to Cart

Features:
Non slip grip handle.
Unit comes with an extension.
It is used to clean surfaces and hard-to-reach places from dirt and dust.
The metal housing is resistant to mechanical damage, which ensures a long service life.

Specifications YATO YT-2373
Spout length 110 mm
Pressure 8.4 atm
Air inlet diameter 1/4 inch
Net weight 0.25 kg

Advantages of YATO YT-2373
Great working resource
Overload and overheat resistance
Light weight due to lack of engine
Low explosion and fire hazard of the working process — Quick view

Yato Metal Air Duster & Extension Shaft. Buy 1 Get 1 Free!

$39.00

Add to Cart

Bordo Long Handle Scratch Brush 4x18 Row Steel. 2 for 1 Deal!

$40.00 $20.00

Add to Cart

Bordo Long Handle Scratch Brush 4x18 Row Steel. 2 for 1 Offer

$36.00 $23.00

Add to Cart

BORDO METRIC DELTA POINT M2 HSS JOBBER DRILLS DIN338 ENGINEERED TO LAST LONGER!
Delta Point drills have a multi-faceted cutting tip. Rather than try and modify existing point types, or tweak the grind angles, Delta Point tip design required a revolutionary re-think of drill tip function. The overall length of the cutting edge significantly exceeds that of conventional drills. This means more edge doing the cutting and the results are simply extraordinary. Drilling times for a range of split point and Delta Point drills consistently showed that Delta Point bits were twice as fast in mild steel. During independent lifetime testing Delta point drill bits averaged 609 holes in 20mm mild steel, ten times more holes than split point drills.

DRILL BIT SURFACE TREATMENT
Bright Finish Jobber Drills have no surface treatment and are supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications. — Quick view

Bordo 19 Pce Delta Point Bright Finish HSS Drill Set 1-10mm

$189.00 $129.00

Add to Cart

Bordo 25 Pce Delta Point Bright Finish HSS Drill Set 1-13mm

$337.00 $179.00

Add to Cart

4-10mm 5 Pce 4 Cutter Glass and Tile Drill Set
Tungsten Carbide 4 Cutter Glass and Tile Drill Set
Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
Fast starting with reduced bit wander.
Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
Not suitable for use with toughened or laminated safety glass.
Use a slow speed with steady but gentle pressure.
Reduce the pressure at break through.
For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
Carbide is three times stiffer than steel and is much denser than either steel or titanium.
Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit chattering" as this is the most common cause of tool failure. — Quick view

Bordo 4-10mm 5 Pce 4 Cutter Glass and Tile Drill Set

$115.00 $65.00

Add to Cart