No more overtightening! New Torque Limited impact wrench is here! The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly. Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors.
Benefits
Low sound level
Full power in reverse
One Hand Operation: 2 power setting positions
Torque limited in forward: 60/70 ft. Lbs. - 90/100 Nm
Suited for all light vehicle tire changing applications
Insulation & Comfort: Contoured comfort grip handle instead of TPR injected in handle
Features
Full teasing trigger
360° swivel air inlet
Aluminum clutch & rear housings
Universal & durable twin hammer mechanism
920 ft.lbs - 1,250Nm of maximum torque in reverse
1/2" composite impact wrench with friction ring socket retainer
2 setting positions : one in Reverse and one Torque Limited in forward
60/70 ft. lbs. - 90/100 Nm in torque limited position in forward
Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops
Actual air consumption 10 l/s 22 cfm
Air inlet thread size 1/4 "
Average air consumption 2 1/2 l/s 5 1/2 cfm
Blows per minute 850
Box dimensions 264*192*75 mm 10.4*7.6*3 "
Clutch type Twin Hammer
European Standards EN ISO 11148-6:2013
Free speed 8200 rpm
Handle type Pistol
Length 250 mm 9.8 "
Maximum Torque (reverse) 1250 Nm 920 ft.lbs
Min. hose size 10 mm 3/8 "
Net weight 2.4 kg 5.3 lb
Over carton 406*282*403 mm 16*11.1*15.9 "
Power/weight ratio 520.8 Nm/kg 174 ft.lb/lb
Side to center 38 mm 1 1/2 "
Socket retainer Friction ring
Sound Power 97 db(A)
Sound pressure 86 db(A)
Square drive 1/2 "
Vibration 4.8 m/s²
Vibration ISO ISO-28927-2
Vibration uncertainty (K) 1 1/2 m/s²
Working Torque Range (fwd) 90 - 140 Nm 66 - 103 ft.lbs
