Contents:
1/4" SB-1 Cylindrical With End Cut Burr - Saber
SB-1 Express cut tungsten carbide burr
1/4" SC-1 Cylindrical Ball Nose Burr - Saber
SC-1 Express cut tungsten carbide burr
1/4" SF-1 Tree Radius Nose Burr - Saber
SF-1 Express cut tungsten carbide burr.
3 Piece 1/4" Head Burr Set - Saber
Smaller burrs require faster running speeds.
Harder materials require slower running speeds.
Running below the optimum speed will cause chipping.
Long shank burrs require slower speeds for safety reasons.
Do not sink the burr for more than one third of its periphery.
Running above optimum speed will cause premature tooth wear.
Apply constant movement and light pressure when using the burr.
Using tools and collets which have become worn will cause chipping.
Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
